12V 17AH CB12170S Valve Regulated Lead Acid Battery Anti Corrosion
The unique construction and sealing techniques of the battery
proof operation in any position with no adverse effect to capacity
or service life.
Electrolyte Suspension System
All batteries utilize an electrolyte suspension system consisting
of a high
porosity, glass fiber material which in conjunction with plates,
totally absorb and
contain the electrolyte.
CGB batteries incorporate a built-in design that controls gas
induces recombination of more than 99% of gases generated during
Maintenance Free Operation
There is no need to check specific gravity of the electrolyte or
add water to
batteries during float service life. In fact, there is no provision
for this type of
Low Pressure Valve Regulated System..
All batteries are equipped with safety release valves, designed to
between 1.5 and 6 psi (10-40kPa) and automatically reseal. Hence,
never an excessive accumulation of gas within the battery.
Heavy Duty Grids
Heavy duty lead calcium tin alloy grids provide an extra margin of
and service life in either float or cyclic applications.
Cyclic Service Life
More that 600 discharge/recharge cycles can be realized from CGB CB
batteries, dependent on the average depth of discharge.
Self Discharge - Shelf Life
The self discharge rate at room temperature is approximately 3% of
capacity per month.
CGB Batteries may be operated over a broad range of ambient
Deep Discharge Recovery
The batteries recover their capacities even after repeated deep
|Nominal Voltage||12V||Capacity||C20||17Ah (10.5V, at 25℃)|
|Nominal Capacity (C20)||17Ah (10.5V,at 25℃)||C10||15.3Ah (10.5V, at 25℃)|
|Dimension||Length 181mm||C3||12.75Ah (10.5V, at 25℃)|
|Width 76mm||C1||10.2Ah (10.2V, at 25℃)|
|Height 167mm||Internal Resistance||Approx. 13 mΩ (25℃)|
|Total Height 167mm||Max Short-duration Discharge Current||510A(25℃)|
Uninterruptable Power Supply (UPS)
Fire alarm and security systems
Electronic test equipment
Electronic measuring devices
Designed life for floating charge is 3-5 years (20℃);
Design with flat plate, GEL electrolyte and AGM separator
GEL electrolyte inside of battery keeps uniformity condition,
battery is with
excellent cycle life;
GEL electrolyte has huge thermal capacity, thermal runaway
High strength ABS material for container & lid;
Wide temperature scope of application(-15~45℃)
Best temperature of application(20±5℃);
No leaking, safe and reliable
Standing or lying down for using, convenient to transport and
Low self-discharge rate.